Inspect Lighting Regularly
1. Regularly clean lighting lamps:
When lamps are not cleaned for a long time, dust accumulates gradually, such as lamp tube and reflection cover, resulting in lower output efficiency, so lamps should be cleaned at least every three months to maintain output efficiency.
2. Regularly replace the old lamp tube:
Incandescent bulbs and daylight bulbs use 80% of their life, the output beam is about 85%, so it should be replaced before the end of their life, reducing waste. For a large number of lighting households, the regular replacement of light source is particularly important. It can not only save labor cost and improve indoor illumination but also save electricity cost, economic and environmental protection.
Take Effective Lighting
1. Selection of local lighting
If you use comprehensive lighting to accompany reading, drawing, makeup... Such a specific activity or job is a waste of electricity. Accordingly, to the vision activity that needs higher illuminance, need to use a reading lamp, desk lamp to wait to serve as local lighting only commonly, provide need illuminance can.
2.Proper illumination
All places have their proper illumination, over and below are inappropriate, too high illumination waste electricity, low illumination is impaired vision health, affecting work efficiency.
Choose different lights at different positions. See this article for details:
《Xinjia Teaches You How To Choose The Home Lighting》
Use Natural Light Sources
1. Daylight utilization
I have good daylighting to an average household, can save electric bill up to 50% above in illume respect. On a clear day, open doors and Windows more often to let more sunlight into the room can make the room brighter. Bright lighting not only makes people happy but also contributes to energy conservation and environmental protection.
2.Building lighting
(1) clear glass is used as the window material to obtain the more abundant natural light source.
(2) the high window design can provide deep and uniform daylight light.
(3) energy saving effect can be achieved by adopting auxiliary daylight light such as light guide plate and light guide tube.
(4) the light color is adopted for indoor wall and curtain, which can improve the diffuse light effect and save electric energy.
(5) keep window glass clean to improve the lighting effect.
Use of Distribution And Control Systems
1. Reasonable lighting and switch circuit
Configuration is not reasonable lamps and lanterns and loop configuration, will cause electric energy to waste, for instance will lean window area lamps and lanterns of area of area of window and do not lean window to become same switch loop repeatedly, if want to close when being in daylight enough, when leaning window area lamps and lanterns, will cause not lean window area illuminative inadequacy. The following items should, therefore, be given priority in the design of lighting distribution systems:
(1) Each independent space should have its own switch.
(2) The larger living room should be divided into several areas according to the attributes of the space so that each area can independently control the lamps and lanterns.
(3) Large peripheral and core areas shall be independently controlled.
2. Automatic control of the lighting system
Lighting system adopts automatic control mode, which can eliminate energy loss caused by human negligence. The control mode is as follows:
(1) Provide timing control for specific space and working time.
(2) Use various sensor sensing lines, a human body, etc., or open and close doors to activate or close lamps (solar energy automatic sensing lamps can be used in courtyards).
(3) Use the daylight automatic sensing system to adjust the output of the light source and the action of turning on and off, so as to make full use of natural light to save electricity.
Replace Inefficient Lighting
LEDs consume a quarter as much energy as CFLs and a tenth as much as incandescent bulbs. And the LED has a lifespan of 25,000 hours, three to five times that of energy-saving lamps. Now the LED lamp has gradually replaced the lamps with the same function, and its advantages in energy saving and life are obvious. The picture below is a good example of how LEDs can save money.
《Why The LED Lights Is The Most Cost-Effective?》
1. Regularly clean lighting lamps:
When lamps are not cleaned for a long time, dust accumulates gradually, such as lamp tube and reflection cover, resulting in lower output efficiency, so lamps should be cleaned at least every three months to maintain output efficiency.
2. Regularly replace the old lamp tube:
Incandescent bulbs and daylight bulbs use 80% of their life, the output beam is about 85%, so it should be replaced before the end of their life, reducing waste. For a large number of lighting households, the regular replacement of light source is particularly important. It can not only save labor cost and improve indoor illumination but also save electricity cost, economic and environmental protection.
Take Effective Lighting
1. Selection of local lighting
If you use comprehensive lighting to accompany reading, drawing, makeup... Such a specific activity or job is a waste of electricity. Accordingly, to the vision activity that needs higher illuminance, need to use a reading lamp, desk lamp to wait to serve as local lighting only commonly, provide need illuminance can.
2.Proper illumination
All places have their proper illumination, over and below are inappropriate, too high illumination waste electricity, low illumination is impaired vision health, affecting work efficiency.
Choose different lights at different positions. See this article for details:
《Xinjia Teaches You How To Choose The Home Lighting》
Use Natural Light Sources
1. Daylight utilization
I have good daylighting to an average household, can save electric bill up to 50% above in illume respect. On a clear day, open doors and Windows more often to let more sunlight into the room can make the room brighter. Bright lighting not only makes people happy but also contributes to energy conservation and environmental protection.
2.Building lighting
(1) clear glass is used as the window material to obtain the more abundant natural light source.
(2) the high window design can provide deep and uniform daylight light.
(3) energy saving effect can be achieved by adopting auxiliary daylight light such as light guide plate and light guide tube.
(4) the light color is adopted for indoor wall and curtain, which can improve the diffuse light effect and save electric energy.
(5) keep window glass clean to improve the lighting effect.
Use of Distribution And Control Systems
1. Reasonable lighting and switch circuit
Configuration is not reasonable lamps and lanterns and loop configuration, will cause electric energy to waste, for instance will lean window area lamps and lanterns of area of area of window and do not lean window to become same switch loop repeatedly, if want to close when being in daylight enough, when leaning window area lamps and lanterns, will cause not lean window area illuminative inadequacy. The following items should, therefore, be given priority in the design of lighting distribution systems:
(1) Each independent space should have its own switch.
(2) The larger living room should be divided into several areas according to the attributes of the space so that each area can independently control the lamps and lanterns.
(3) Large peripheral and core areas shall be independently controlled.
2. Automatic control of the lighting system
Lighting system adopts automatic control mode, which can eliminate energy loss caused by human negligence. The control mode is as follows:
(1) Provide timing control for specific space and working time.
(2) Use various sensor sensing lines, a human body, etc., or open and close doors to activate or close lamps (solar energy automatic sensing lamps can be used in courtyards).
(3) Use the daylight automatic sensing system to adjust the output of the light source and the action of turning on and off, so as to make full use of natural light to save electricity.
Replace Inefficient Lighting
LEDs consume a quarter as much energy as CFLs and a tenth as much as incandescent bulbs. And the LED has a lifespan of 25,000 hours, three to five times that of energy-saving lamps. Now the LED lamp has gradually replaced the lamps with the same function, and its advantages in energy saving and life are obvious. The picture below is a good example of how LEDs can save money.
《Why The LED Lights Is The Most Cost-Effective?》
It is believed that through the above changes, your electric charge will be improved significantly. For better advice on saving your electricity bill, please let us know in the comments that we will give you free coupons once adopted.
没有评论:
发表评论